Contact Us

Duke Power Limited

We are professionally manufactured in laser cutting service,log splitter,wood chipper,log saw,mower and so on.

Address:Laigang road,Laizhou city,Shandong province,China.

City: Laizhou

State: Shandong

Postal Code: 261400

Country: China

Manager: Joanna


Tel: +86-535-2465555

Fax: +86-535-2465888

Phone: +86-15064587700

Service Hotline


Home > NewsContent

Log Splitter Production Of The Two Major Problems

Duke Power Limited | Updated: Oct 24, 2017

Log Splitter production of the two major problems
In the production of Log Splitter, we first need to understand its production technology, we are in the manufacturing, because its design is relatively simple, as long as the material into the equipment can be processed into wood chips, so that in the production, We need to take this into account, then in fact it is in the production of two technical problems, so that we must pay attention when dealing with.
Difficult one:
Log Splitter A large number of forced feed, horizontal feed, and heavy wood (thickness greater than 12 cm) are the main cause of the feed roll. Reasonable control of feed, no more than 12cm thick material and large bundles of raw materials directly into the Log Splitter. To ensure that the raw material along the length of the feed, to prevent the horizontal feed, if the raw material card in the feeding mechanism of the second pair of rollers on the roller and the sparse between, can only use the stick down poke, So as not to fall into the machine caused serious accidents.
Difficulty II:
Log Splitter fan pressure decreases, the pump head speed decreases, its power supply voltage is low or motor failure, pipe network resistance increases, reducing pipe network resistance; working state changes, adjust the working state; motor reverse, motor rewiring. Log Splitter Shock Increases: Bearing Damage - Replacement Bearing, Fan Impeller Unbalance - Clears the foreign body in the impeller or static balance, spindle deformation - Replace the spindle or pump head, the working state enters the end seismic area - adjusts the working condition, Area, inlet and outlet into the filter plug - cleaning filter. The fan flow is reduced: the inlet and outlet gas filter is blocked - the cleaning filter, the pump head speed decreases - the power supply voltage is low or the motor is faulty, the pipe network resistance increases - reduces the pipe network resistance, the working condition increases - adjusts the working condition, its electrical machinery Turn reverse - motor rewiring.
Log Splitter in the production of technical problems, I believe that many craftsmen in the production of time have been noted, then encounter this situation, we need to adopt a certain skill and reasonable way to deal with it, so as to ensure its production Quality issues.
Log Splitter When we are working, we will maintain and operate the equipment in order to ensure that the wood can ensure its quality when sliced, but when we are in use, it will inevitably encounter the situation that the material is jammed, but This situation does not make us discouraged, find the right solution, in order to better deal with the problem, then we come to understand the reasons for this phenomenon under the where?
1, taboo with iron to poke, so as not to fall into the Log Splitter caused serious accidents.
2, the raw material card in the Log Splitter feeding mechanism of the second pair of rollers between the upper roller and the sparse plate, can only use the stick down the poke.
3, to ensure that the raw material along the length of the feed, to prevent horizontal feed.
4, a reasonable control of the amount of feed, is strictly prohibited large bundles of raw materials directly into the Log Splitter.
5, it is under normal circumstances, as long as the commitment to put the timber thickness of less than 12cm, you can effectively avoid this failure.
In the case of the Log Splitter roll, we need to develop a solution that is mainly due to the large amount of forced feed, the lateral feed, and the heavy wood being fed, so we can The above method, to ensure the normal operation of equipment.